CCA Logo
FAQ/Tech Tip Detail:
Removing the Door Panel

Updated: Dec 28, 1999
Author: CCA Webmaster
Email: cca-webmaster@corrado-club.com [email author about this]

Answer:

I'm trying to remove my door panels so I can try to isolate that annoying

rattling. I can get the lock plunger off, the window switches off, the

mirror switch off, but I can't remove the door opening latch nor the handle

that you hold on to to close the door!! How do I get these two items

off?!?! Do I also need to remove my door speakers? HELP HELP HELP!!!

OK, I'll list everything you need to remove.

  1. Screws on side (may have covers on them)

  2. screw(s?) underneath

  3. slide off speaker cover

  4. remove screw(s?)

  5. grab the door handle latch plastic outside edge thing and slide

    it (forward, I think). it then pulls out.

  6. The door handle comes apart. There is a plastic cover that you can pull off

    the rest of the handle. The seams are behind the line of vision.

    I just grab the sides really tight and pull while prying my

    fingers into the seam. Now two screws are exposed that hold the

    handle on.

  7. Remove the little black triangle near the side mirror carefully. It just

    snaps off, but will also just break off instead.

  8. Unscrew the lock plunger

  9. Pry the bottom edge out of the plastic clips. Be sure you know how it

    was so you'll know when you put it back together!

Good luck!


Help Support the CCA by:
  • Joining the CCA
  • Buying CCA merchandise
  • Advertising
  • Sending donations.
  • Read our Privacy Statement
  • Subscribe to the Corrado-L mailing list.
  • Send feedback via our Feedback Form.
  • Any suggestions are welcome.
  • Donate using PayPal. Make payments with PayPal - it's fast, free and secure!
  • CCA Site Version 6.7. Copyright © 1994 - 2006, Corrado Club of America. All rights reserved.
    The Corrado Club of America, Inc. is a nonprofit group run entirely by volunteers. ISP support provided by Netsville.