Easy easy mod here..

Go to local home depot or homehardware get the "light" sheets that used to refect floresant lights in offices, you have all seen them..

1. unscew your side marks

2. pop off (they will probally break cause of the glue) with a small standard screwdriver.

3. use that sidemarker as a template to trace it on the "lighting" *NOTE*

4. Cut the softly with sharp blade (press hard)

5. Glue them on with superglue

6. Re install

*Note*

place flat side out, and to have diffrent colour lights without buything them, use a trasparent matariel.

Also each side is oppisite so after u get the first one cut out flip it and trace your second