Install. hmmmm... the right side is almost straight bolt on. you have to open up the vents in the lower grill, and trim the opening in the wheel well liner. All the bolt holes etc. are there. Left side... not so easy. There's some metal that has to be trimmed away, it pretty much blocks the opening in the lower grill. I used a cutoff wheel to trim out the metal. There's plenty of room to cut the section out. After the metal is out of the way, the duct slides right in place. The towhook cover should be removed for best airflow into this duct.
Total time for the install was about 2 hours.
Help Support the CCA by:
The Corrado Club of America, Inc. is a nonprofit group run entirely by volunteers. ISP support provided by Netsville.